Probe Housing Flange
Description
Shipping & Delivery
Related products
ET2T Series Teflon Wire Epoxy Coated NTC Thermistor
The ET2T series are small size epoxy coated sensing devices with using Teflon separate wire . Wide range of tolerances and wire configurations makes them ideal choice for temperature sensing, control and compensation. It is easy and flexible to use .
Download
MZ6 Series Motor Protection PTC Thermistor
MZ6T PTC motor protection type thermistor is specially designed for over-temperature protection of motors and other parts according to international standards DIN-44081 and DIN-44082. The PTC thermistor is placed in the three-phase winding of the motor. When the temperature reaches the insulation level temperature, the resistance of the PTC rises, and the high-resistance signal is transmitted to the control protector, and the protector disconnects the motor line according to the signal to protect the motor.
Thermal-links/Thermal cut off/Thermal fuse
Alloy Thermal-link/Thermal Cutoff(TCO) is defined as a non-resettable protective device functioning one time only.It is widely used in electrical equipment.Alloy TCO is mainly consist of fusible alloy,flux, plastic or ceramic case,sealant epoxy and lead wires.Normally, fusibel alloy is jointed to the two lead wires.Under abnormal conditions, when the temp reaches to the fusing temp of alloy TCO, the fusible alloy melts and quickly retracts to the two lead wire ends with the aid of the flux and disconnects the circuit completely.
Download
ET1S Series Standard Lead Epoxy Coated NTC Thermistor
The ET1S series NTC thermistors are small size epoxy coated sensing devices. Industry standard characteristics and tolerances makes them ideal choice for low cost high volume applications.
Download
ET1C Series Coated Lead Epoxy Coated NTC Thermistor
The ET1C series NTC thermistors are small size epoxy coated sensing devices with additional epoxy on the leads. With good heat resistance and stability, they are suitable for automotive temperature sensors.
Download
