Probe Housing Straight Probe
Description
Shipping & Delivery
Related products
ET1C Series Coated Lead Epoxy Coated NTC Thermistor
The ET1C series NTC thermistors are small size epoxy coated sensing devices with additional epoxy on the leads. With good heat resistance and stability, they are suitable for automotive temperature sensors.
Download
PT1000 Series Platinum Temperature Sensors
The PT series are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital.The temperature sensor consists of a photo-lithographically structured, high-purity platinum coating arranged in the shape of a meander. The platinum thin film structures are laser trimmed to form resistive paths with very precisely
defined basic value of the resistivity. The sensors are covered with a glass passivation layer; to protect the sensor against mechanical and chemical damage
Download
MZ6 Series Motor Protection PTC Thermistor
MZ6T PTC motor protection type thermistor is specially designed for over-temperature protection of motors and other parts according to international standards DIN-44081 and DIN-44082. The PTC thermistor is placed in the three-phase winding of the motor. When the temperature reaches the insulation level temperature, the resistance of the PTC rises, and the high-resistance signal is transmitted to the control protector, and the protector disconnects the motor line according to the signal to protect the motor.
Thermal-links/Thermal cut off/Thermal fuse
Alloy Thermal-link/Thermal Cutoff(TCO) is defined as a non-resettable protective device functioning one time only.It is widely used in electrical equipment.Alloy TCO is mainly consist of fusible alloy,flux, plastic or ceramic case,sealant epoxy and lead wires.Normally, fusibel alloy is jointed to the two lead wires.Under abnormal conditions, when the temp reaches to the fusing temp of alloy TCO, the fusible alloy melts and quickly retracts to the two lead wire ends with the aid of the flux and disconnects the circuit completely.
Download
ET1S Series Standard Lead Epoxy Coated NTC Thermistor
The ET1S series NTC thermistors are small size epoxy coated sensing devices. Industry standard characteristics and tolerances makes them ideal choice for low cost high volume applications.
Download
GT3 Series Radial Type Glass Probe Encapsualted NTC Thermistor
The GT3 series thermistors is designed for high environmental reliability and wide temperature range of usage (-40℃~300℃) . Long glass body also can make it have good insulation .This small size and glass package makes it ideal for space measurement and temperature measurement and control in extreme temperatures, corrosive environments and harsh environments.
Download
DS18B20 Temperature Sensors
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply.Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control system.
Download
